Ornament Keepsakes Stamp Set and Be of Good Cheer DSP Christmas Card

I cannot get enough of making cards with the Ornament Keepsakes Stamp Set (128051) from Stampin’ Up! (SU)!  My opinion is that this set is one of SU’s best sets for the season.  For today’s card share, I have coupled the Ornament Keepsakes Stamp Set with the Stampin’ Up! Be of Good Cheer DSP (126896).

The picture below provides a side view, including the inside, of the card.

This picture shows the dimensions of the card.

This picture is of the card’s inside.

Stampin’ Up! Supplies (including catalog item numbers) Used to Create the Ornament Keepsakes Christmas Card:

Stamp Sets:  Ornament Keepsakes Stamp Set (128051), Greetings of the Season (128033), and Christmas Blessings (123809)

Paper:  Raspberry Ripple Card Stock (126842), Crumb Cake Card Stock (120953), Whisper White Card Stock (100730), and Be of Good Cheer Designer Series Paper(126896)

Ink (Stampin’ Write Markers): Raspberry Ripple (126856 – comes in a pack of 5 different colors),  Gumball Green (same as above), Crumb Cake (120967), and a VersaMark Ink Pen

Accessories:  Adorning Accents Edgelits (125595), Holiday Ornaments Framelits (127816), Crumb Cake  1/2″ Seam Binding Ribbon (122332), Heat Tool, Heat and Stick Powder (100625), Dazzling Diamonds Glitter (102023), and Foam Adhesive Circles

Instructions for Creating the Ornament Keepsakes Christmas Card:

You will:

  • Cut an 8-1/2″ x 5-1/2″ piece of Raspberry Ripple Card Stock and fold it in the middle to form the card base.
  • Cut along both 5-1/2″ sides of the card front using the scalloped Adorning Accents Edgelit.

  • Cut a 4-1/4″ x 4-7/8″ piece of Crumb Cake Card Stock and a 4-1/4″ x 4-5/8″ piece of the Be of Good Cheer Designer Series Paper.
  • Cut along both 4-7/8″ sides of the Crumb Cake Card Stock and the 4-5/8″ sides of the piece of Be of Good Cheer DSP using the scalloped Adorning Accents Edgelit.

  •  Apply VersaMark Ink around the scalloped edges of the Crumb Cake Card Stock, cover with Heat and Stick Powder, heat set, cover with Dazzling Diamonds Glitter, and heat set.
  • Attach to the front of the card front.

  • Cover the three Ornament Keepsakes stamps with Gumball Green, Raspberry Ripple, and Crumb Cake ink using the Stampin’ Write Markers (see first picture).
  • Stamp the images onto Whisper White or Very Vanilla Card Stock.
  • Cut the images out with the appropriate Holiday Ornaments Framelits.
  • OPTIONAL ORNAMENT MATS:
    • Cut off the white border of each ornament.
    • Cut out the same ornaments using the framelits and Crumb Cake Card Stock.
    • Trace around each Crumb Cake ornament onto Raspberry Ripple Card Stock and cut them out about 1/16″ outside the tracings.
    • Adhere the Crumb Cake ornaments to the stamped ornaments, and the Raspberry Ripple ornaments to the Crumb Cake ornaments.
  • Attach thread, twine, cord, etc., around the top of each ornament…Attach foam adhesive circles onto the back of each ornament.
  • Attach each ornament onto the piece of the Be of Good Cheer DSP.  Wrap the thread (or whatever you choose to use) over the top of the DSP and adhere to the back side.
  • Tie three bows using the Crumb Cake1/2″ Seam Binding Ribbon and attach them to the card front (see first picture).
  • Cover with Gumball Green Ink the “Merry Christmas” stamp from the Christmas Blessings stamp set and stamp the image onto a piece of Very Vanilla Card Stock.
  • Cut out the sentiment and adhere to the bottom of the piece of DSP.
  • Adhere the DSP over the Crumb Cake Card Stock that was previously adhered to the card front.
  • Decorate the card’s inside as desired.
God’s Blessings!
Stamping With Guneaux Designs
by
Beverly Polen

 Enjoy making Christmas cards with your Ornament Keepsakes Stamp Set!

Stampin Up Ornament Keepsakes and Holiday Ornaments Framelits

Are you in love yet . . . with the Stampin Up Ornament Keepsakes Stamp Set, that is?  I certainly am, and it is featured again today on my card share.

Stampin Up Ornament Keepsakes

 This picture provides a closeup of the ornament:

Stampin Up Ornament Keepsakes

This picture provides a view at a different angle:

Stampin Up Ornament Keepsakes

Stamping Up supplies used to create the card featuring the Stampin Up Ornament Keepsakes Stamp Set:

Stamps:  Stampin Up Ornament Keepsakes (128051),  Watercolor Winter (129727), and Curly Cute (120510)

Ornament Keepsakes Clear-Mount Stamp SetWatercolor Winter Clear-Mount Stamp SetCurly Cute - Clear-Mount Stamp Set - by Stampin' Up!

Paper:  Cherry Cobbler Card Stock (119685), Gumball Green Card Stock (126840), and Whisper White Card Stock (100730)

Ink: Gumball Green Classic Ink (126861), Old Olive Classic Ink (126953), VersaMark lnk(102283), and Black StazOn Ink (101406)

Accessories:  Holiday Ornaments Framelits (127816), Big Shot Die Cutting Machine (113439), Iridescent Ice Embossing Powder (101930), Cherry Cobbler Embossing Powder (122949), Silver Embossing Powder (109131), Black Brads (119736), Cherry Cobbler 1/2″ Seam Binding Ribbon (120992), and Heat Tool of your choice

Instructions for creating the Stampin Up Ornament Keepsakes card:

  • Cut an 8-1/2″ x 5-1/2″ piece of Gumball Green Card Stock, fold or score in half for the card base; a 4″ x 5-1/4″ piece of Cherry Cobbler Card Stock; and a 3-3/4″ x 5″ piece of Whisper White Card Stock,
  • Cover with Gumball Green Classic Ink the pine needles stamp from the Watercolor Winter Stamp Set and randomly stamp around the Whisper White Card Stock,
  • Repeat but with Old Olive Classic Ink, and set the card stock to the side,
  • Cover the appropriate ornament stamp image with VersaMark on Whisper White Card Stock,
  • Carefully apply Silver Embossing Powder at the top of the ornament,
  • Carefully apply Cherry Cobbler Embossing Powder to the remainder of the ornament and heat set,
  • Using the appropriate Holiday Ornaments Framelits and the Big Shot, cut out the ornament,
  • Use the same framelit to cut out an ornament from Cherry Cobbler Card Stock,
  • Cut the Cherry Cobbler ornament in half from the top to the bottom,
  • Adhere this to the back side of the Cherry Cobbler Embossed ornament for a mat,
  • Attach dimensionals (double up for better dimensions) to the back of the matted ornament,
  • Tie silver elastic cord around the top of the ornament,
  • Remove paper from dimensionals and attach to front of the pine needles stamped piece of card stock,
  • Punch a small hole near the top of the the card stock, insert the cord, and adhere it to the back of the card stock,
  • Tie a Cherry Cobbler bow and attach above the ornament,
  • Cover with Black StazOn Ink the sentiment, Seasons Greetings, from the Curly Cute stamp set and stamp the sentiment onto the bottom just below the ornament,
  • Add four black brads, one at each corner,
  • Adhere this piece to the 4″ x 5-1/4″ piece of Cherry Cobbler Card Stock, and
  • Adhere this to the Gumball Green card base.

Enjoy the card featuring the Stampin Up Ornament Keepsakes Stamp Set and Holiday Ornaments Framelits, which you can get as a bundle (129950) from Stampin Up.

God’s Blessings!
Stamping With Guneaux Designs
by
Beverly Polen

Ornament Keepsakes Stamp Set and Snow Festival Designer Series Paper

Here is my latest creation – a Christmas card featuring the Ornament Keepsakes Stamp Set and Snow Festival Designer Series Paper.  The card also features a rosette.

 Ornament Keepsakes Stamp Set

Closeup of the ornament and rosette Ornament Keepsakes Stamp Set

Side view of the ornament and rosette Ornament Keepsakes Stamp Set

Stampin’ Up! Supplies (unless otherwise noted) used to make the card featuring the Ornament Keepsakes Stamp Set:

Stamp SetOrnament Keepsakes Stamp Set (128051) and Greetings of the Season Stamp Set (128033)

Paper:  Baja Breeze Card Stock (111352), Cherry Cobbler Card Stock (119685), Whisper White Card Stock (100730), and Snow Festival Designer Series Paper (126908)

Ink:  Gumball Green Classic Ink (126861) and Cherry Cobbler Classic Ink (126966)

Accessories:  Stampin’ Up! Simply Scored Scoring Board (122334), Border Punch of your choice, 1-1/4″ Large Circle Punch (119861), Hot Glue, Holiday Ornaments Framelits (127816), Big Shot Die-Cutting Machine (113439), Corner Punch (119871), VersaMark (102283), Heat and Stick Powder (100625), Dazzling Diamonds (102023), and Heat Tool of your choice

Ornament Keepsakes Clear-Mount Stamp SetSnow Festival Designer Series PaperSimply Scored Scoring ToolGreetings of the Season Clear-Mount Stamp Set

       SU 1-1/4" Circle Punch Holiday Ornaments Framelits DiesBig Shot Die-Cut Machine - by Stampin' Up!

 

Instructions for making the card featuring the Ornament Keepsakes Stamp Set:

  • Cut an 8-1/2″ x 5-1/2″ piece of Baja Breeze Card Stock and fold it in the middle to create the card base,
  • Cut a 4″ x 5-1/4″ piece of the ornament design from the Snow Festival Designer Series Paper and round the edges with the 3/16″ Corner Punch,
  • Cut a 1-1/2″ x 11″ piece of Cherry Cobbler Card Stock and score it at every 1/4″,
  • OPTIONAL:  Using a border punch of your choice, punch along one of the 8-1/2″ side,
  • Accordion fold the card stock and adhere the ends together,
  • Punch a 1-1/4″ circle from Cherry Cobbler Card Stock with the 1-1/4″ Circle Punch,
  • With the accordian folded card stock standing up, use your fingers to push down the card stock,
  • Holding the card stock down and using hot glue, attach the 1-1/4″ circle on top and let dry,
  • Cover an ornament stamp (see picture of card) with Gumball Green Classic Ink and stamp onto a piece of Whisper White Card Stock,
  • Cut out the ornament with the appropriate Holiday Ornaments Framelits,
  • Cover the ornament with VersaMark and apply Heat and Stick Powder,
  • Heat set the powder, add Dazzling Diamonds, and heat set again, 
  • If a mat for the ornament is desired, lay the framelit onto Baja Breeze Card Stock, trace around the framelit, and cut out the mat,
  • Adhere the mat to the ornament (I covered the mat with Dazzling Diamonds),
  • Adhere the rosette to the DSP (I used hot glue),
  • Adhere the ornament on top of the rosette (I used hot glue),
  • Cover the “Merry Christmas” sentiment in Cherry Cobbler Classic Ink (from the Greetings of the Season set) and stamp onto Whisper White Card Stock,
  • OPTIONAL:  Decorate the sentiment,
  • Adhere the sentiment to the bottom of the DSP, and
  • Adhere the decorated DSP to the Baja Breeze card base. 

 If you follow these instructions but have a question, please don’t hesitate to leave your question in the comment section.

God’s Blessings!
Stamping With Guneaux Designs
by
Beverly Polen
Enjoy the Ornament Keepsakes Stamp Set and the Greeting Card!